Skip to content
Quality

Our quality standards

Every stage from copper raw material to dispatch is controlled and recorded against defined standards.

EN 12735-1

Seamless round copper tubes for air conditioning and refrigeration

Copper grade (Cu-DHP), dimensional tolerances, mechanical properties and bore cleanliness are defined by this standard.

ASTM B280

Seamless copper tube for refrigeration field service

Dimensional and temper requirements for US-origin markets and export projects.

EN 14313

Polyethylene foam (PEF) insulation products

Declaration of thermal conductivity, dimensional stability and water vapour diffusion resistance of the insulation.

Cu-DHP

Copper grade (CW024A)

Phosphorus-deoxidised copper; purity at least 99.90%. Soft annealed, bendable and brazeable.

Copper tube

Copper tube properties

MaterialCu-DHP (CW024A) – phosphorus-deoxidised copper with high residual phosphorus
Copper content≥ %99,90 Cu · P 0,015–0,040 %
TemperR220 (soft annealed) · Rm ≥ 220 MPa · A ≥ %40
OD tolerance± 0,05 mm (≤ 12,7 mm) · ± 0,06 mm (15,87–19,05 mm)
BoreDry, oil-free; carbon residue ≤ 0.038 g/m²
EndsPlastic capped, protected against moisture ingress

Why Cu-DHP?

Phosphorus-deoxidised copper resists hydrogen embrittlement during brazing and does not form porosity in the joint. It is the grade the standards require for refrigeration circuits.

Pressure rating

Our tube is produced to suit the working pressures of high-pressure refrigerants such as R410A and R32; every size meets the pressure requirements of the relevant standard.

Insulation

Insulation properties

Our insulated pipes use closed-cell, non-crosslinked polyethylene foam (PE). The closed-cell structure blocks water and vapour, preventing condensation on the tube and the gradual decay of the insulation. The insulation and white PE skin are UV-stabilised and flame-retardant; they do not yellow outdoors and do not sustain a flame.

The insulation is applied as a tight sleeve; it does not wrinkle when the pipe is bent and slides back easily for brazing.

MaterialClosed-cell PE foam, white outer skin
AdditivesUV-resistant, flame retardant
Thickness9 mm or 13 mm
Density30–35 kg/m³
Thermal conductivityλ ≤ 0,038 W/m·K (40 °C)
Water vapour diffusion resistanceμ ≥ 3.500
Operating temperature−40 °C … +95 °C
Fire behaviourClassified to EN 13501-1; report on request
Water absorption≤ %1 (by volume)
Production control

Checks applied to every batch

01

Incoming material

Copper coil certificate, chemical analysis and visual inspection; density check of insulation raw material.

02

Dimensional measurement

Outer diameter and ovality; laser and mechanical measurement, batch record.

03

Leak control

During copper tube production the tube is laser-measured; any point with a leak risk is marked and removed from the line.

04

Insulation line

Thickness, adhesion, surface and print check; coiling and strapping.

05

Final inspection and dispatch

Label, length and packaging check; traceability by batch number.

Values on this page are typical production values. Contact our sales team for project-specific declarations of conformity, test reports and samples.

Tell us the diameter, we produce to your specification.

Wall thickness, insulation colour and pattern, coil length and brand printing are set to your order. Send your request and we will share a quote and lead time.